Taking the proper measurements for your in-line glass shower door is an important step when building your new Fleurco shower.
Simply follow these six easy steps and have your measurements on hand when placing your door order.
Pen & paper to mark your measurements
*It is recommended to use a level of at least 2' to get an accurate reading.
To begin, draw your shower door opening on a piece of paper.
Measure the opening width along the curb and record it on your paper.
Measure the opening width at the middle of the shower opening and record it on your paper.
Measure the opening width at the top of the shower opening and record it on your paper.
Finish the measuring process by measuring the height of your walls/tiles to ensure they are taller than the desired shower door.
Place your level on the right wall, starting at the bottom.
If the wall is not plumb, adjust the level. Take and record the measurement between the edge of the level and the wall, if needed.
Move the level up the wall and record a second measurement at the top of the opening.
Repeat steps 3 and 4 on the left wall and record any measurements, if the wall is not plumb.
Place the level on the curb at the base of the shower opening.
If it is not plumb, adjust the level and record the measurement of the gap, from the base to the horizontal reference line.
If you need assistance at any point during the measuring process, please contact Fleurco’s customer service team. We are always happy to help.
Please complete and submit this online Limited Warranty Claim Form for any warranty claim relating to a Fleurco product.
Should you prefer to send your claim by mail, please download and complete the paper form.
*Upload proof of purchase
Prior to submitting this claim, please ensure that you have read and understood Fleurco’s Limited Warranty and have fully complied with the installation manual which was included with your product. Failure to do so will invalidate this claim.
I have read and understood the Fleurco limited warranty for this productSend